TM 1-1270-476-30
4-196
4-17. DAY TV SOLID STATE CAMERA ASSEMBLY AND NIGHT SENSOR ELECTRO-OPTICAL
MULTIPLEXER ASSEMBLY REPAIR (cont)
4. ELECTRO-OPTICAL SENSOR ASSEMBLY
REPLACEMENT
REMOVAL
a. Remove light shield (3 above).
b. Remove camera cover assembly A4 (1).
(1) Remove two screws (2) and disconnect
power supply connector A6P1 from
connector A7P1.
(2) Remove screw (3) and disconnect
connector A7P1 from connector A4J2.
(3) Remove eight screws (4) and two
screws (5).
NOTE
Separate A7 wiring harness grommet from
cover assembly before removing cover
assembly.
(4) Remove camera cover assembly A4(1).
c. Loosen two screwlocks and disconnect EO
Sensor connector A1P1 from Digital CCA
connector A2J1.
d. Remove digital CCA A2 (6) by pulling
straight up.
e. Remove analog CCA A3 (7) by pulling
straight up.
f. Remove CCA bracket (8) by removing two
screws (9) and screw (10) with flat washer
(11).
232-061
5
4
3
1
2
232-047A
9
8
11
10
7
6
