TM 1-1270-476-30
4-193
4-17. DAY TV SOLID STATE CAMERA ASSEMBLY AND NIGHT SENSOR ELECTRO-OPTICAL
MULTIPLEXER ASSEMBLY REPAIR
This task covers replacement of:
Para
Item
1.
Light Baffle Assembly, Day Sensor
Camera Only
2.
Visual Imager Assembly, Night
Sensor Camera Only
3.
Light Shield
4.
Electro-Optical Sensor, A1
5.
Adjustment Bracket and Flat Spring
6.
Video Processor Unit
INITIAL SETUP
Tools
Aircraft armament repairman tool set
Aircraft armament technical inspector tool set
Materials (appendix C)
Corrosion inhibitive sealing and coating
compound (Item 15 or 16)
Lens tissue (Item 41)
Masking tape (Item 59)
Sealing, locking, and retaining compound
(Item 13)
Sealing, locking, and retaining compound
primer (Item 45)
Personnel Required
68J Aircraft Fire Control Repairer
66J30 Aircraft Armament Technical Inspector
FOLLOWUP
Have EETF maintenance personnel perform
functional test.
CAUTION
• While performing these procedures keep all
exposed lens covered with lens paper to
prevent damage to coated optical surfaces.
• This assembly contains electrostatic
discharge sensitive devices (ESDS). Refer
to paragraph 2-8 for handling requirements
before starting these tasks, to prevent
damage to the devices.
TASK DESCRIPTION
This task contains the procedures to repair the Day Sensor Solid State Camera Assembly A3 and Night
Sensor Electro-Optical Multiplexer Assembly by replacing components.
