TM 1-1270-476-30
4-199
4-17. DAY TV SOLID STATE CAMERA ASSEMBLY AND NIGHT SENSOR ELECTRO-OPTICAL
MULTIPLEXER ASSEMBLY REPAIR (cont)
5. ADJUSTMENT BRACKET AND FLAT
SPRING REPLACEMENT
REMOVAL
a. Remove electro-optical sensor (4 above).
b. Remove three screws (1) and flat washers
(2).
c. Remove adjustment bracket (3).
d. Remove self-locking nut (4) and flat washer
(5).
e. Remove flat spring (8), screw (6), and flat
washer (7).
INSTALLATION
f. Remove old corrosion inhibitive sealing and
coating compound from mounting hardware
(para 2-6).
g. Apply corrosion inhibitive sealing and
coating compound to mounting hardware
(para 2-6). Use class 1A application.
h. Install screw (6) with flat washer (7) from
outside camera housing.
i. Install flat spring (8) inside camera housing.
Secure flat spring using flat washer (5) and
self-locking nut (4).
j. Install adjustment bracket (3). Secure
adjustment bracket using three flat washers
(2) and screws (1).
k. Install electro-optical sensor and camera
cover (4 above).
END OF TASK
5
4
8
7
6
1
2
3
232-049A
