TM 55-1880-320-23 & P
3-36. WINCH ASSEMBLY - REPAIR (cont)
3-36
1. Disassembly.
a.
b.
c.
d.
e.
f.
g.
h.
NOTE
Prior to disconnecting chain (4) from
switch drive assembly, mark sprocket
on drive assembly and winch housing
to preserve timing and prevent need
for adjustment.
Remove chain guard cover (1) by removing
screws (2) and Washers (3).
Remove chain (4) by removing master link.
Remove sprocket (5) by removing retaining
ring (6). Remove key (7).
Remove lit switch drive assembly (8) by
removing screws (9) and washers (10).
Remove boot (11) from motor air duct (12)
by removing bands (13) and clips (14).
Remove airduct by removing bolts (15).
Remove motor (16) be releasing coupling
(17). Remove packing (18) from motor shaft
and discard.
Remove inertia dump assembly (19) from
adapter plate (20).
Remove adapter plate (20) by removing
screws (21 ) and washers (22).
GO TO NEXT PAGE
3-115
