TM 55-1680-320-23 & P
3-36. WINCH ASSEMBLY - REPAIR (cont)
3-36
i,
j.
k.
1.
NOTE
Brake may be difficult to remove from
housing.
Remove pump housing assembly (23) and
brake housing (24) by removing bolts (25) and
washers (26). Remove automatic brake as-
sembly (27) from winch assembly (28).
Separate pump housing (23) from brake
housing (24). Remove shaft assembly (29),
pump assembly (30) and bearing (31) from
pump housing.
Remove oil transfer tube (32) from pump
housing (23). Remove and discard packings
(33).
Separate brake housing (24) from brake cup
(35). Press out bearings (36) and remove
spacers (37) from brake cup,
m. Remove sprag clutch assembly (38),
n.
sleeve (39) and spring (40) from pump drive
shaft (43), Remove retainers (41) and pack-
ings (42) from drive shaft. Discard packings.
Remove packings (44) from brake housing
(24) and discard,
28
GO TO NEXT PAGE
3-116
