TM 55-1680-320-23 & P
3-36. WINCH ASSEMBLY - REPAIR (cont)
3-36
o.
P.
q.
r.
s.
t.
Remove screws (45, 46), washers (47, 48) and
nuts (49).
Carefully remove assembled cover (50) and
drum (51) from winch housing (28).
Remove retaining ring (52) and shim (53).
Remove retainer (54) and level wind shoe (55)
from drum (51).
Remove clamp (56) from connector (57) by
removing screws (58).
Using a suitable pin removal tool, remove pins
from connector (57).
Remove heat shrink tubing and electrical braid
from thermal switch (59). Unscrew thermal
switch from winch housing (28).
GO TO NEXT PAGE
3-118
