TM 55-1680-320-23 & P
3-35. FLEXIBLE WIRING HARNESS - REPLACE (cont)
3-35
d.
e.
f.
g.
h.
i.
h.
Remove pins (11 ) from lower base plate
(12).
Remove quick disconnect (13) by remov-
ing cotter pin (14). Discard cotter pin.
Remove washer (15) and lower base plate
(12).
Remove reaction plate assembly (16).
Remove clamp (17) by removing screws
(18). Disconnect limit switch electrical
wiring from flexible wiring harness.
Remove limit switches (19) by removing
screws (20), washers (21 ) and spacers
(22).
Remove clamp (23) by removing screws
(24). Disconnect electrical wiring from
connector P4 and flexible wiring harness.
Remove screw (25) and washer (26).
Remove cam support (27) by removing
screws (28). Remove bolts (29) and slide
cam support off stanchion tube (2).
GO TO NEXT PAGE
3-110