TM 55-1680-320-23&P
Change 8 2-125
2-59. HOIST CABLE ASSEMBLY - INSPECT
2-59
This task covers:
Inspection
INITIAL SETUP
Personnel Required:
Equipment Condition:
67N, UH1 Helicopter Repairer
Hoist installed in helicopter or assembly stand
67T, UH60 Helicopter Repairer
Parts/Materials:
Equipment Condition Para:
None
Task 2-5
Tools and Test Equipment:
References:
Cable Spool, 42277-730 or
General Aircraft Maintenance Manual
equivalent
TM 1-1500-204-23
Leather Gloves, MIL-G-2366
Micrometer
Aircraft Weapons Systems Cleaning and Corrosion Control
TM 1-1500-344-23
WARNING
To avoid injury to personnel from broken wire strands, leather gloves must be worn at all times when
handling cable assembly.
CAUTION
Protect hoist cable from damage. Do not allow kinks or bends to occur. Maintain hook weight on cable
at all times (pull downward on cable while reeling out and in). Feed onto cable spool, coil the cable into
a suitable container or onto a protective pad which will prevent cable contact with the ground or over
abrasive surfaces.
