TM 55-1680-320-23 & P
2-27. CONTROL PANEL ASSEMBLY - REPLACE
2-27
This task covers: Removal and Installation
INITIAL SETUP
Personnel Required:
67N, UH1 Helicopter Repairer (2)
67T, UH60 Helicopter Repairer (2)
68F, Airmail Electrical Repairer (2)
Parts/Materials:
Lockwire (Item 17, App, D)
Cap Plugs (Items 6-9, App. D)
Tools and Test Equipment:
Tool Set, Aviation Unit Maintenance
NSN 4920-00-567-0476
Plier, 44191D192 or equivalent
Equipment Condition:
Hoist installed in assembly stand
Control pendant removed
Equipment Condition Para:
Task 2-5
Task 2-16
References:
None
1. Removal.
a.
b.
c.
d.
e.
Remove control pendant cable (1) from control
panel assembly (2).
Disconnect electrical connectors (3, 4, 5, 6)
from control panel (2). Install protective caps
on all receptacles.
Remove lockwire and disconnect electrical
connector (7) from control panel (2). Install
protective cap.
Using plier, remove bands (8) by removing
clips (9). Remove boot (10).
Back off screws (11) until flush with control
panel (2).
GO TO NEXT PAGE
2-68
