TM 55-1680-320-23 & P
2-22.
CABLE CUTTER ASSEMBLY - REPLACE
2-22
This task covers: Removal and Installation
INITIAL SETUP
1.
Personnel Requ i r ed
67N, UHl Helicopter Repairer
67T, UH60 Helicopter Repairer
Tools and Test Equipment:
Tool Set, Aviation Unit Maintenance
NSN 4920-00-567-0476
Equipment Condition
Hoist installed in assembly stand.
Pressure roller cover removed.
Equipment Condition Para:
Task 2-5
Task 2-20
2.
Rescue hoist cable cutter contains an
explosive cartridge. Use extreme care
when handling to prevent injury to
personnel. Static producing clothing
prohibited. Install aluminum foil
shorting strips between cartridge pins
when disconnecting harness.
a.
a. Disconnect cable cutter harness (1) from cable
b.
cutter (2).
c.
b. Remove cap (3) and anvil (4) from cable cutter (2).
c. Remove cable cutter (2) by removing bolts (5).
Rescue hoist cable cutter contains an
explosive cartridge. Use extreme care
when handling to prevent injury to
personnel. Static producing clothing
prohibited.
Install cable cutter (2) using bolts (5).
Install anvil (4) and cap (3) onto cable cutter (2).
Connect cable cutter harness (1) to cable cutter
(2).
END OF TASK
2-62
Change 3
R e m o v a l .
Installation
