TM 55-1680-320-23 & P
2-21. CABLE CUTTER ASSEMBLY - INSPECT
2-21
This task covers: Inspection
INITIAL SETUP
Personnel Required:
67N, UHl Helicopter Repairer
67T, UH60 Helicopter Repairer
Parts/Materials:
None
Tools and Test Equipment:
None
Equipment Condition:
Hoist installed in helicopter
or assembly stand
Cable cutter removed
Equipment Condition Para:
Task 2-5
Task 2-22
References:
None
Rescue hoist cable cutter contains an explosive cartridge. Use extreme care when handling to prevent injury
to personnel. Static producing clothing prohibited. When disconnecting harness, install piece of aluminum
foil between cartridge pins and install shipping cap.
1. Inspect for corrosion (refer to Task 2-11).
2. Inspect cable cutter electrical connector for bent, broken and missing pins. Inspect for evidence of overheating.
3. Inspect electrical cable for frayed and broken insulation. Check for cuts and tears.
FOLLOW-ON MAINTENANCE:
Install cable cutter assembly
Task 2-22)
END OF TASK
2-61
