0130
TM 1-1740-221-13&P&P
STEERING COLUMN - (CONTINUED)
REMOVAL
1. Remove 3 steering panel mount screws (Figure 1, Item 1).
2. Remove steering panel (Figure 1, Item 2).
3. Disconnect horn wire (Figure 2, Item 3).
4. Remove steering horn button (WP 0128).
5. Remove steering wheel (WP 0129).
6. Remove directional signal arm (WP 0115).
7. Remove 4 orbital valve retaining bolts (Figure 2, Item 2) and washers (Figure 2, Item 4).
8. Drop orbital valve (WP 0136) and move away from steering column.
9. Remove steering column (Figure 2, Item 1).
Figure 2. Steering Column (Removal and Installation)
END OF TASK
INSTALLATION
1. Position steering column (Figure 2, Item 1).
2. Position orbital valve (WP 0136) on steering column.
3. Install 4 orbital valve retaining bolts (Figure 2, Item 2) and washers (Figure 2, Item 4).
4. Install directional signal arm (WP 0115).
5. Install steering wheel (WP 0129).
6. Install steering horn button (WP 0128).
7. Connect horn wire (Figure 2, Item 3).
8. Position steering panel (Figure 1, Item 2).
01302