0129
TM 1-1740-221-13&P&P
STEERING WHEEL - (CONTINUED)
REMOVAL
NOTE
Wheel puller may be used to aid in steering wheel removal.
1.
Disconnect negative battery cables (WP 0111).
2.
Remove horn button (WP 0128).
3.
Remove nut (Figure 1, Item 2).
4.
Remove steering wheel (Figure 1, Item 3).
END OF TASK
INSTALLATION
1. Install steering wheel (Figure 1, Item 3).
2. Seat steering wheel in position with a mallet or soft-faced hammer.
3. Install nut (Figure 1, Item 2).
4. Install horn button (WP 0128).
5. Connect negative battery cables (WP 0111).
6. Perform Maintenance Operation Check.
END OF TASK
END OF WORK PACKAGE
01292