0131
TM 1-1740-221-13&P&P
HYDRAULIC TANK ASSEMBLY (STEERING) - (CONTINUED)
7.
Install 4 mount bolts (Figure 1, Item 10) and nuts (Figure 1, Item 8) and tighten.
8.
Connect hydraulic suction hose (Figure 1, Item 11) and remove tag.
9.
Connect hydraulic return hose (Figure 1, Item 7) to itting (Figure 1, Item 6) and remove tag.
10.
Remove ilter (Figure 1, Item 3) from tank.
11.
Fill tank with hydraulic luid and perform luid check this work package. Check for leaks.
12.
Reinstall ilter (Figure 1, Item 3) into tank.
13.
Install tank cap (Figure 1, Item 1) and gasket (Figure 1, Item 2).
NOTE
Remove any air that may have entered the hydraulic system by starting engine and turning
steering wheel full right, then full left. Repeat several times.
14.
Perform Maintenance Operation Check.
15.
Recheck luid level this work package. Add as required.
16.
Install center support bar (WP 0028).
17.
Install center deck plate (WP 0028).
18.
Install engine cover (WP 0028).
END OF TASK
END OF WORK PACKAGE
01314
