0131
TM 1-1740-221-13&P&P
HYDRAULIC TANK ASSEMBLY (STEERING) - (CONTINUED)
REMOVAL
WARNING
The use of Personal Protective Equipment (PPE) is required when using or handling hazardous
materials associated with operating and maintaining equipment (jet fuel, hydraulic luid, brake
luid, ethylene glycol, cleaning solvents, compressed air, and engine/axle oil). Failure to use
PPE when handling these materials could result in injury or death.
NOTE
Cap, plug and tag all lines and itting during removal to aid with the reinstallation process.
Note the orientation of all itting and hoses during removal to aid with the reinstallation process.
1.
Remove engine cover (WP 0028).
2.
Remove center deck plate (WP 0028).
3.
Remove center support bar (WP 0028).
4.
Remove suction hose (Figure 1, Item 11).
5.
Allow all hydraulic luid to drain.
6.
Remove hydraulic return hose (Figure 1, Item 7).
7.
Remove 4 mount nuts (Figure 1, Item 8) and mount bolts (Figure 1, Item 10).
8.
Remove hydraulic tank (Figure 1, Item 9) and drain remaining luid.
9.
Remove itting strainer assembly (Figure 1, Item 12 and 13) as an assembly.
10.
Remove breather cap (Figure 1, Item 14).
11.
Remove dipstick (Figure 1, Item 4) from mount (Figure 1, Item 5).
12.
Remove tank cap (Figure 1, Item 1) and gasket (Figure 1, Item 2).
13.
Remove ilter assembly mount bolts (Figure 1, Item 5 and 18).
14.
Remove ilter assembly (Figure 1, Item 17) from tank (keep associated parts together).
15.
Dispose of ilter element (Figure 1, Item 3) if contaminated.
END OF TASK
CLEANING
1. Clean strainers (Figure 1, Item 13 and 15) and associated parts.
2. Clean tank for disposal or for reinstallation.
3. Wipe tank seat area clean.
END OF TASK
INSTALLATION
1. Install strainer assembly (Figure 1, Item 12 and 13) as an assembly.
2. Install ilter assembly (Figure 1, Item 17) (with new ilter if required) as an assembly.
3. Install ilter assembly mount bolts (Figure 1, Item 5 and 18).
4. Install dipstick (Figure 1, Item 4) into mount (Figure 1, Item 5).
5. Install breather cap (Figure 1, Item 14).
6. Position hydraulic tank (Figure 1, Item 9).
01313
