0120
TM 1-1740-221-13&P&P
DASH PANEL - (CONTINUED)
Ignition Switch
1. Off Position
a. Ohms test ignition switch for continuity between all terminals.
b. All switch terminals should read open (no continuity).
2. Run Position
a. Ohms test ignition switch for continuity.
b. ACC-IGN, continuity should exist.
c. IGN-BATT, continuity should exist.
d. ACC-BATT, continuity should exist.
3. Start Position
a. BATT-ACC, continuity should exist.
b. BATT-START, continuity should exist.
c. BATT-IGN, continuity should exist.
END OF TASK
01202
