0093
TM 1-1740-221-13&P&P
SHOCK ABSORBER (FRONT AND REAR) - (CONTINUED)
2.
Remove mount bolt (Figure 1, Item 4), washer (Figure 1, Item 6) and nut (Figure 1, Item 7).
3.
Remove mount bolt (Figure 1, Item 1) and washer (Figure 1, Item 2).
4.
Remove shock absorber (Figure 1, Item 3) from vehicle.
Repeat Steps 35 and remove the other rear shock absorber.
5.
END OF TASK
INSTALLATION
FRONT SHOCK ABSORBERS
1. Position front shock absorber (Figure 1, Item 3) on top mount.
2. Install mount bolt (Figure 1, Item 1) and washer (Figure 1, Item 2) and tighten.
NOTE
Shock may have to be collapsed or expanded to line up with the bottom mount.
3.
Install mount bolt (Figure 1, Item 4), washer (Figure 1, Item 6) and nut (Figure 1, Item 7) and tighten.
Repeat Steps 13 to install the other front shock absorber.
4.
5.
Install center console plate (WP 0028).
6.
Install seats (WP 0096).
7.
Perform Maintenance Operation Check.
REAR SHOCK ABSORBERS
1. Position rear shock absorber (Figure 1, Item 3) on top mount.
2. Install bolt (Figure 1, Item 1) and washer (Figure 1, Item 2) and tighten.
NOTE
Shock may have to be collapsed or expanded to line up with the bottom mount.
3.
Install mount bolt (Figure 1, Item 4), washer (Figure 1, Item 6) and nut (Figure 1, Item 7) and tighten.
Repeat Steps 13 to install the other front shock absorber.
4.
5.
Perform Maintenance Operation Check.
6.
Install rear deck plate.
END OF TASK
END OF WORK PACKAGE
00932