0094
TM 1-1740-221-13&P&P
SPRING ASSEMBLY (FRONT AND REAR) - (CONTINUED)
1.
Chock rear wheels.
2.
Disconnect battery negative cables (WP 0111).
3.
Jack vehicle front (WP 0029).
4.
Remove front wheels (WP 0092).
5.
Position loor jack under the axle end assembly and apply pressure to the axle.
6.
Remove lower shock mount bolt (WP 0093).
7.
Remove leaf mount bolt (Figure 1, Item 6) and nut (Figure 1, Item 7) and remove bolt.
8.
Remove 4 spring mount bolts (Figure 1, Item 1) and washers (Figure 1, Item 2) and remove bolts.
9.
Remove spring plate (Figure 1, Item 3).
10.
Remove 2 axle mount nuts and washers (WP 0075).
11.
Lower axle jack 1 to 2 inches.
12.
Remove spring assembly (Figure 1, Item 8).
REAR SPRINGS
Figure 2.
Rear Springs
00942