0092
TM 1-1740-221-13&P&P
WHEELS AND TIRES - (CONTINUED)
REMOVAL
WARNING
Use extreme caution when lifting heavy components. Never permit any part of the body to be
positioned under these components being lifted or suspended. Use suitable lifting equipment
for heavy components. Failure to follow these instructions can result in serious injury or death.
NOTE
All 4 wheel removal and installation procedures are the same.
1.
Lift vehicle (WP 0029).
2.
Remove 4 wheel lug nuts (Figure 1, Item 1).
3.
Remove wheel (Figure 1, Item 2).
END OF TASK
INSTALLATION
WARNING
Failure to follow proper wheel installation procedures could result in wheel mounting failure and
or loss of vehicle control.
Do not apply lubricant to wheel studs, as it will result in inaccurate tightening torque.
1.
Clean and dry wheel lug nuts, studs, and mating surfaces.
2.
Position wheel assembly (Figure 1, Item 2) on studs.
3.
Install 4 wheel lug nuts (Figure 1, Item 1) and snug.
4.
Torque wheel lug nuts (Figure 1, Item 1) in a crisscross pattern to 400 ft. lbs..
5.
Lower the vehicle (WP 0029).
6.
Perform Maintenance Operation Check.
WARNING
Perform an additional wheel lug nut re-torque after 1 and 8 hours of operation, then monthly
or every 250 hours of operation.
7.
Re-torque wheel lug nuts (Figure 1, Item 1) in a crisscross pattern to 400 ft-lb.
END OF TASK
END OF WORK PACKAGE
00922