0091
TM 1-1740-221-13&P&P
HAND BRAKE LIMIT SWITCH - (CONTINUED)
1.
Disconnect battery negative cables (WP 0111).
2.
Remove protective boot (Figure 1, Item 1).
3.
Remove screws and washers (Figure 1, Item 3).
4.
Remove wires (Figure 1, Item 4).
5.
Remove hand brake switch (Figure 1, Item 2).
END OF TASK
INSTALLATION
1. Install hand brake switch (Figure 1, Item 2).
2. Position wires (Figure 1, Item 4).
3. Install screws and washers (Figure 1, Item 3).
4. Install protective boot (Figure 1, Item 1).
5. Connect battery negative cables (WP 0111).
6. Perform Maintenance Operation Check.
END OF TASK
END OF WORK PACKAGE
00912