0049
TM 1-1740-221-13&P&P
SOLENOID VALVE (3-POSITION/SINGLE SOLENOID) - (CONTINUED)
NOTE
If necessary, perform Step 7 to remove the 4-wheel drive spool assembly.
7.
Turn spool assembly mount nut (Figure 5, Item 4) counter clockwise and remove spool assembly
(Figure 5, Item 5).
Solenoid Valve Assembly
WARNING
The use of Personal Protective Equipment (PPE) is required when using or handling hazardous
materials associated with operating and maintaining equipment (jet fuel, hydraulic luid, brake
luid, ethylene glycol, cleaning solvents, compressed air, and engine/axle oil). Failure to use
PPE when handling these materials could result in injury or death.
CAUTION
To prevent transmission malfunction, avoid contamination or damage to internal parts when
replacing solenoid valve assembly.
00496