0043
TM 1-1740-221-13&P&P
TRANSMISSION - (CONTINUED)
3.
Remove nuts (Figure 1, Item 2 and 3) from threaded rods (Figure 1, Item 4 and 5).
4.
Loosen nut (Figure 1, Item 1) and remove threaded rods (Figure 1, Item 4 and 5).
5.
Remove park position motor assembly (WP 0085).
6.
Remove park position caliper (WP 0087).
7.
Remove hand brake caliper/cable bracket assembly (WP 0090).
Figure 2. Brake Disk (Removal and Installation)
NOTE
Nut has a detent that must be straightened before you can loosen nut.
8.
Removing stake nut (Figure 2, Item 3) and washer (Figure 2, Item 1).
9.
Remove disc (Figure 2, Item 2).
00432
