0042
TM 1-1740-221-13&P&P
GLOW PLUGS - (CONTINUED)
REMOVAL
1
2
3
5
4
WP0034F2
Figure 2. Glow Plug (Removal and Installation)
1.
Open engine cover (WP 0028).
2.
Disconnect battery negative cables (WP 0111).
3.
Remove four glow plug rail nuts (Figure 2, Item 1).
4.
Remove glow plug wire (Figure 2, Item 2).
5.
Remove glow plug rail (Figure 2, Item 5).
6.
Ohms test glow plug(s) (Test/Inspection).
7.
Remove defective glow plug(s) (Figure 2, Item 3).
END OF TASK
INSTALLATION
1. Install glow plug(s) (Figure 2, Item 3) into engine.
2. Torque glow plug(s) to 15-18 ft. lbs. (20 to 24 N-m, 2.0 to 2.5 kgf-m).
3. Position glow plug rail (Figure 2, Item 5) on glow plugs (Figure 2, Item 3).
4. Install glow plug wire (Figure 2, Item 2) on rail.
5. Install four glow plug rail nuts (Figure 2, Item 1) and secure.
6. Connect battery negative cables (WP 0111).
7. Perform Maintenance Operation Check.
8. Close engine cover (WP 0028).
END OF TASK
END OF WORK PACKAGE
00422