0035
TM 1-1740-221-13&P&P
ALTERNATOR - (CONTINUED)
INSTALLATION
2
1
3
7
6
4
5
WP0027F1
Figure 1. Starter (Test, Removal and Installation)
WARNING
Remove all jewelry such as rings, ID tags, watches, and bracelets. If jewelry or tools contact a
battery positive terminal, a direct short will result in instant heating or electric shock, damage to
equipment, and injury to personnel.
1.
Position alternator (Figure 1, Item 4) on the engine.
2.
Install bottom alternator mount bolt and nut (Figure 1, Item 5). Do not tighten.
3.
Position bracket and install upper alternator mount bolt and washer (Figure 1, Item 1). Do not tighten.
4.
Tighten bracket mount bolt (Figure 1, Item 7).
5.
Position fan belt (Figure 1, Item 6) over the alternator pulley.
6.
Using pry bar, carefully pull the alternator (pressure on the alternator frame) until belt is tight.
7.
Hold pressure and tighten top alternator mount bolt (Figure 1, Item 1).
00353