0034
TM 1-1740-221-13&P&P
STARTER - (CONTINUED)
REMOVAL
5
3
4
6
2
7
8
1
10
WP0026F1
9
Figure 1. Starter (Test, Removal and Installation)
WARNING
Remove all jewelry such as rings, ID tags, watches, and bracelets. If jewelry or tools contact a
battery positive terminal, a direct short will result in instant heating or electric shock, damage to
equipment, and injury to personnel.
1.
Disconnect battery negative cables (WP 0111).
2.
Open engine cover (WP 0028).
3.
Remove nut (Figure 1, Item 1) and washer (Figure 1, Item 2) from starter solenoid terminal (Figure 1, Item
6).
4.
Remove 3 wires; positive battery cable (Figure 1, Item 3), #1 red & white striped (Figure 1, Item 4) and #1
solid red (Figure 1, Item 5).
5.
Remove wire from starter solenoid (Figure 1, Item 7).
6.
Remove bottom starter mount bolt (Figure 1, Item 9).
7.
Remove starter mount nut (Figure 1, Item 8).
8.
Remove starter assembly (Figure 1, Item 10).
END OF TASK
00342
