0036
TM 1-1740-221-13&P&P
TURBOCHARGER - (CONTINUED)
1.
Position turbocharger assembly (Figure 1, Item 5) on exhaust manifold (new gasket).
2.
Install 2 rear turbocharger mount nuts (Figure 1, Item 7).
3.
Install 2 front turbocharger mount bolts (Figure 1, Item 9).
4.
Install 2 lower oil drain tube mount bolts (Figure 1, Item 10).
5.
Position sealing washer assembly (Figure 1, Item 2) on upper oiling tube.
6.
Install upper oil tube mount bolt (Figure 1, Item 4).
NOTE
If coil clamp was released, reposition coil clamp and retighten.
7.
Install 4 turbo exhaust mount bolts (Figure 1, Item 8) (One bolt not shown) (New gasket).
8.
Position hose (Figure 1, Item 11).
9.
Tighten clamp (Figure 1, Item 1).
10.
Position hose (Figure 1, Item 6).
11.
Tighten clamp (Figure 1, Item 3).
12.
Close engine cover (WP 0028).
13.
Connect negative battery cables (WP 0111).
END OF TASK
END OF WORK PACKAGE
00363/blank