0033
TM 1-1740-221-13&P&P
ENGINE SERVICE - (CONTINUED)
5.
ENGINE OIL/FILTER CHANGE
1
WP0025F2
2
Figure 2.
Oil and Filter Change
WARNING
To avoid personal injury allow the engine to cool suficiently prior to changing the engine oil and
ilter; hot oil can cause severe burns. Use appropriate PPE to prevent injury.
1.
Place drain pan (5 gal capacity) under the engine oil pan drain plug. Either drain plug may be used.
2.
Remove engine oil drain plug (Figure 2, Item 2) and allow oil to drain.
3.
Clean and install drain plug.
4.
Place drain pan under oil ilter.
5.
Using a ilter wrench loosen the oil ilter (Figure 2, Item 1) allowing oil in the ilter cartridge to drain.
6.
Remove and dispose of oil ilter.
7.
Wipe clean the oil ilter engine-mating surface.
8.
Lubricate the new oil ilter seal with a small amount of clean lubricating oil.
00332