TM 1-1740-221-13&P&P
FIELD MAINTENANCE
TRANSMISSION TROUBLESHOOTING
INITIAL SETUP:
Test Equipment
Multimeter (WP 0157, Item 14)
Tools and Special Tools
General Mechanic Tool Box (WP 0157, Item 24)
Personnel Required
91B Light Wheel Vehicle Mechanic (2)
References
TROUBLESHOOTING PROCEDURE
Transmission troubleshooting Procedurers
WARNING
Do not attempt to service or otherwise make any adjustments, connections, or re-connections
of wires until SATS is shut down and batteries are disconnected. Remove all rings, watches,
and other jewelry when performing maintenance on this equipment.
The use of Personal Protective Equipment (PPE) is required when using or handling hazardous
materials associated with operating and maintaining equipment (jet fuel, hydraulic luid, brake
luid, ethylene glycol, cleaning solvents, compressed air, and engine/axle oil). Failure to use
PPE when handling these materials could result in injury or death.
BRANCH 1.
TRANSMISSION WILL NOT ENGAGE
1. Check transmission luid level (WP 0044).
CONDITION/INDICATION
Is luid level correct?
DECISION
YES Proceed to Step 2.
NO Service the transmission (WP 0044).
BRANCH 2.
2.
Check that the hand brake is released or disengaged.
CONDITION/INDICATION
Is hand brake released?
00101
