TM 1-1730-227-13&P
STANDARD AIRCRAFT MAINTENANCE TRAILER
PART NO. 4920-EG-081 NSN 1730-01-086-1653
RAIL STOP ASSEMBLY
INITIAL SETUP:
Tools and Special Tools
Personnel Required
Tool Kit, Aircraft Maintenance, (WP 0036 00, Item 2)
MOS 15H
Wrench, Torque 30-200 in lb, 1/4 drive
(WP 0036 00, Item 4)
INSPECTION OF INSTALLED ITEMS
Figure 1.
Rail Stop Removal and Installation.
1.
Check rail stop assembly for bent or broken stop pin. Check for missing or broken spring or pull ring.
2.
Check rail stop assembly for operation. Make certain stop pin retracts by pulling down on ring and returns
when ring is released.
REPAIR OR REPLACEMENT
1.
Remove burrs from end of stop pin using the appropriate file contained in the tool kit.
2.
Remove dirt and obstructions from spring.
3.
Replace with new rail stop assembly if required.
0013 00-1
