0014 00
TM 1-1730-227-13&P
REPAIR OR REPLACEMENT
1.
Welding. Welding to repair cracks is to be done in accordance with FM 1-563.
2.
Use the appropriate hand file contained in the tool kit to remove burrs and sharp edges from pallet assembly.
3.
Tighten loose parts. Replace missing, damaged, bent, or distorted parts.
REMOVAL
1.
Remove eight hex head screws (Figure 1, Item 1), lock nuts (Figure 1, Item 3) and flat washers (Figure 1,
Item 2) from pallet assembly (Figure 1, Item 4).
2.
Remove pallet assembly (Figure 1, Item 4) from pallet mounting channels (Figure 1, Item 5 and 6)
INSTALLATION
1.
Position pallet assembly (Figure 1, Item 4) on top of pallet mounting channels (Figure 1, Item 5 and 6).
2.
Insert eight hex head screws (Figure 1, Item 1) through holes on the pallet assembly (Figure 1, Item 4) and
pallet mounting channels (Figure 1, Item 5 and 6).
3.
Install a flat washer (Figure 1, Item 2) and a lock nut (Figure 1, Item 3) on each hex head screw (Figure 1, Item
1). Tighten lock nuts (Figure 1, Item 3) to a torque of 540 in-lbs.
0014 00-2