0013 00
TM 1-1730-227-13&P
REMOVAL
1.
Remove two hex head bolts (Figure 1, Item 1), hex nuts (Figure 1, Item 2), and helical lock washers (Figure
1, Item 3) securing rail stop assembly (Figure 1, Item 4) to rail (Figure 1, Item 5).
2.
Remove rail stop assembly (Figure 1, Item 4) from rail (Figure 1, Item 5).
INSTALLATION
1.
Position rail stop assembly (Figure 1, Item 4) on rail (Figure 1, Item 5).
2.
Install two hex head bolts (Figure 1, Item 1) through the rail stop assembly (Figure 1, Item 4) into the rail
(Figure 1, Item 5).
3.
Install a helical lock washer (Figure 1, Item 3) and a hex nut (Figure 1, Item 2) on each hex head bolt (Figure
1, Item 1). Tighten hex nuts (Figure 1, Item 2) to a torque of 72 in-lbs.
END OF WORK PACKAGE
0013 00-2