TM 1-1730-223-13&P
0013 00
REMOVAL
DETENT PIN AND STEERING BAR
Figure 3.
Steering Bar.
1.
Remove tongue (Figure 3, Item 3).
2.
Remove tie rods (Figure 3, Item 2).
3.
Remove detent pin (Figure 3, Item 1) from steering bar (Figure 3, Item 4) and main frame.
4.
Pull steering bar (Figure 3, Item 4) from beneath main frame step (Figure 3, Item 5).
REPAIR OR REPLACEMENT
Repair the steering bar by welding or replacement. Replace detent pin if defective.
INSTALLATION
1.
Insert steering bar (Figure 3, Item 4) beneath main frame step (Figure 3, Item 5) and align with hole in
mainframe.
2.
Insert detent pin (Figure 3, Item 1).
3.
Reinstall tie rods (Figure 3, Item 2) and tongue (Figure 3, Item 3).
END OF WORK PACKAGE
0013 00-3/4 blank
