TM 1-1730-223-13&P
0012 00
REMOVAL
BRAKE LININGS
Figure 2.
Parking Brake Assembly.
1.
Remove Wheel Assembly.
2.
Remove the shoe assembly tension spring (Figure 2, Item 1 ) from the linings (Figure 2, Item 7).
3.
Reach behind the mounting plate (Figure 2, Item 2) and push in on the clip (Figure 2, Item 3).
4.
Pull the spring pin (Figure 2, Item 4) free from the back of the mounting plate (Figure 2, Item 2).
5.
Remove clip (Figure 2, Item 3) and compression spring (Figure 2, Item 5) from the front of mounting plate.
0012 00-3