TM 1-1270-476-30
4-372
4-45. LASER ELECTRONICS UNIT (LEU) HARNESS ASSEMBLY W1 REPAIR (cont)
v. Install card basket (19) with six capscrews
(20), washers (21), two screws (22), and
cable clamps (23).
w. Install filter bank assembly (39) with
preformed packing (42), 14 screws (40) and
washers (41).
x. Install relay K1 (28) with three screws (29)
and washers (30).
y. Install relay cover (24) with preformed
packing (27), four capscrews (25), and
washers (26).
CAUTION
Avoid excess strain on wiring harness WI
when connecting P1, P2, and P3.
z. Connect connector P1 (10) to connector J1
(18) and secure by tightening two
screwlocks (17).
aa. Connect connector P2 (11) to connector J2
(16) and secure by tightening two
screwlocks (15).
ab. Connect connector P3 (12) to connector J3
(14) and secure by tightening two
screwlocks (13).
ac. Install motherboard (9) with seven screws
(6), washers (7), and 14 nylon washers (8)
to LEU case (4).
ad. Install bottom cover (3) to LEU case (4)
with preformed packing (5), 20 screws (1),
and washers (2).
ae. Perform followup.
END OF TASK
