TM 1-1270-476-30
4-315
4-37. INDIRECT VIEW DISPLAY (IVD) ELECTRONICS ASSEMBLY 2A3 REPAIR (cont)
10. HIGH VOLTAGE POWER SUPPLY
ASSEMBLY A3 REPLACEMENT
CAUTION
This CCA contains electrostatic discharge
sensitive (ESDS) devices. Refer to paragraph
2-8 for handling requirements before starting
this task, to prevent damage to the devices.
REMOVAL
a. Disconnect connector P3 (1) by loosening
two screwlocks (2).
b. Disconnect connector P1 (3) and connector
P2 (4).
c. Remove high voltage power supply
assembly A3 (5) by removing five screws
(6), lockwashers (7), and washers (8).
INSTALLATION
d. Install high voltage power supply assembly
A3 (5) with five screws (6), lockwashers (7),
and washers (8).
e. Connect connector P1 (3) and connector
P2 (4).
f. Connect connector P3 (1) and tighten two
screwlocks (2).
END OF TASK
