TM 1-1270-476-30
4-314
4-37. INDIRECT VIEW DISPLAY (IVD) ELECTRONICS ASSEMBLY 2A3 REPAIR (cont)
WARNING
CRT HANDLING
• High vacuum tube-implosion danger exists.
• Don’t: Strike CRT neck or face; use undue
pressure when removing or installing CRT;
carry by neck.
• Do: Handle carefully, properly supporting
CRT; wear face shield, rubber gloves, and
rubber apron.
e. Remove CRT module assembly A1 (6) by
loosening four captive screws (7).
INSTALLATION
f. Install CRT module assembly A1 (6) and
tighten four captive screws (7).
g. Install connector P1 (4) and connector P2
(5).
h. Connect connectors P5 (1) and P6 (2) and
tighten two screwlocks (3) on each
connector.
i. install CCA A15 (8 above).
j. Install CCA A13 and A14 (7 above).
END OF TASK
