TM 1-1270-476-30
4-304
4-37. INDIRECT VIEW DISPLAY (IVD) ELECTRONICS ASSEMBLY 2A3 REPAIR (cont)
1. BOTTOM ASSEMBLY COVER
REPLACEMENT
REMOVAL
NOTE
Three screws (1) are not cover mounting
screws. Do not loosen when removing cover.
a. Remove bottom assembly cover (2) by
loosening 15 captive screws (3).
INSTALLATION
b. Install bottom assembly cover (2) and
tighten 15 captive screws (3).
2. TOP ASSEMBLY COVER REPLACEMENT
REMOVAL
NOTE
Two screws (1) are not cover mounting
screws. Do not loosen when removing cover.
a. Remove top assembly cover (2) by
loosening 11 captive screws (3).
INSTALLATION
b. Install top assembly cover (2) and tighten
11 captive screws (3).
END OF TASK
