TM 1-1270-476-30
4-114
4-5. NIGHT SENSOR ASSEMBLY (NSA) REPAIR (cont)
b. Starting with CCA A20 (4), loosen two
screwlocks (5) and disconnect each
connector (6) up to and including connector
for faulty CCA.
CCA A12 (7)
CCA A19 (14)
CCA A13 (8)
CCA A20 (4)
CCA A14 (9)
CCA A21 (15)
CCA A15 (10)
CCA A22 (16)
CCA A16 (11)
CCA A26 (17)
CCA A17 (12)
CCA A27 (18)
CCA A18 (13)
CAUTION
Do not try to bend flexible printed cable unless
heated. Do not overheat. Too much heat will
damage printed cable.
NOTE
A heat source of approximately 200°F is best
to make cable soft and bend easily. Holding
heat gun approximately 5 inches away from
the point you want to heat will usually apply
about 200°F.
c. Heat and carefully move flexible printed
cable assembly out of the way.
d. Remove faulty CCA using printed circuit
board extractor.
