TM 1-1270-476-30
4-33
4-3. TADS TURRET ASSEMBLY REPAIR (cont)
d. Remove connector J2 (6) from shroud
support assembly bracket (7) by removing
two nuts (8), lockwashers (9), four washers
(10), and two screwlock posts (11).
e. Remove connector J5 (12) from shroud
support assembly bracket (13) by removing
two nuts (14), lockwashers (15), four
washers (16), and two screwlock posts
(17).
f. Remove two cushion clamps (18) securing
cable (19) to right side of shroud support
assembly by removing screws (20) and
washers (21). Note mounting location of
clamps for reinstallation.
g. Remove cushion clamp (22) on right side of
shroud support assembly by removing
screw (23) and washer (24). Note mounting
location of clamp for reinstallation.
