TM 55-1680-320-23&P
1-14 Change 8
(3)
Allow water to drain from the storage drum assembly and winch housing. Relubricate level wind screw and
level wind gears with grease MIL-G-238278 and ball spline assembly with light oil, MIL-L-7808 or MIL-L-23699.
(4)
Using MIL-L-7808 or MIL-L-2369 lubrication oil, re-lubricate the cable assembly while reeling onto the
storage drum to aid in replacement of the self-lubricating properties of the cable assembly.
c. Cleaning Electrical Components.
WARNING
Trichloroethane is toxic to eyes, skin and respirator tract. Skin and eye protection required. Avoid
repeated or prolonged contact. Good general ventilation is normally adequate.
CAUTION
Do not immerse electrical components in cleaning solvent. Wipe clean cloth dampened in soap and water
solution.
(1)
Clean rescue hoist assembly wiring harness with low lint cloth, MIL-C-85403, Type II moistened with
trichloroethane, MIL-T-81533.
(2)
Clean control panel assy with low lint cloth, MIL-C-85403, Type II moistened with trichloroethane,
MIL-T-81533.
(3)
Clean electrical contact pins with cloth soaked, trichloroethane.
