TM 55-1680-320-23 & P
3-29. BOOM POSITION SUPPORT ASSY - REPAIR (cont)
3-29
l.
m.
n.
o.
p.
q.
r.
s.
t.
Remove pins (32) from lower base plate
( 3 3 ) .
Remove quick disconnect (34) by remov-
ing cotter pin (35). Discard cotter pin.
Remove washer (36) and lower base plate
(33).
Remove plate (37) and overload bracket
(38) by removing screws (39), washers (40)
and nuts (41). Remove pins (32).
Remove limit switches (42) from bracket
(38) by removing screws (43), washers (44)
and nutplates (45).
Remove reaction plate assembly (46) and
lever (47). Disassemble plate assembly,
if required, by removing plate (48), bushing
(49), pin (50), mounting flange (51 ) and
insert (52).
Remove clamp (53) by removing screws
(54).
Remove limit switches (55) by removing
screws (56), washers (57) and spacers (58).
Remove clamp (59) by removing screws
(60). Disconnect electrical wiring from
connector P4 (72) and flexible wiring har-
ness. Remove screw (61 ) and washer (62).
Remove cam support (63) by removing
screws (64, 65) and washers (66). Remove
bolts (67) and slide cam support cover (68)
off stanchion tube (10).
GO TO NEXT PAGE
3-97
