TM 55-1680-320-23 & P
3-29. BOOM POSITION SUPPORT ASSY - REPAIR (cont)
3-29
c.
d.
e.
f.
g.
h.
i.
j.
k.
Slide cam cover (68) and cam support
(63) onto stanchion tube (10). Install
bolts (67).
Connect electrical wiring from connector
P4 (72) and remaining end of flexible
wiring harness (69) to stanchion tube (10)
using screw (61 ) and washer (62).
Install clamp (59) to stanchion tube (10)
using screws (60).
Secure cam support (63) and cover (68)
to stanchion tube (10) using screws (64,
65) and washers (66).
Install limit switches (55) using screws
(56), washers (57) and spacers (58).
Safety wire screws.
Attach wiring harness (69) to limit
switches (42). Install clamp (53) using
screws (54).
Assemble reaction plate assembly (46)
by installing inserts (52), mounting flange
(51), pin (50), bushing (49) and plate (48).
Install reaction plate assembly and lever.
Install limit switch actuators and limit
switches (42) onto overload bracket (38)
and secure using screws (43), washers
(44) and nutplates (45).
Install plate (37) and overload bracket
(38). Attach pins (32) using screws (39),
washers (40) and nuts (41 ).
l. Install lower base plate (33), washer (36)
and quick disconnect (34). Secure by in-
stalling cotter pins (35),
m. Install pin (32) through lower base plate
(33).
GO TO NEXT PAGE
3-100