TM 55-1680-320-23 & P
3-23. CLUTCH ASSEMBLY - REPLACE (cont)
3-23
b.
c.
d.
Remove side cover assembly (3) by removing
bolts (4, 5) and washers (6). Remove and
discard packing (7).
Remove thrust washer (8) from sheave shaft
(9).
Turn clutch assembly (10) counterclockwise
to unlock, and remove from sheave shaft (9).
2. Installation.
a.
b.
c.
d.
Install clutch assembly (10), with spring end
out, on sheave shaft (9). Turn clutch assembly
clockwise to lock in place.
Install thrust washer (8) on sheave shaft (9).
Lubricate packing (7) and install onto side
cover assembly (3). Install side cover assemb-
ly and secure using bolts (4, 5) and washers
(6).
Connect electrical connector (1) to cable cutter
( 2 ) .
FOLLOW-ON MAINTENANCE:
Service boom head assembly
(Task 2-18)
Conduct operational check
(Task 3-7)
END OF TASK
3-81