TM 1-1740-221-13&P&P
FIELD MAINTENANCE
STRAINER (HYDRAULIC TANK)
INITIAL SETUP:
Tools and Special Tools
References
General Mechanics Tool Kit (WP 0157, Item 24)
Materials/Parts
Equipment Condition
Cleaning Solvent (WP 0156, Item 8)
Engine Shut Down
Personnel Required
91B, Light Wheel Vehicle Mechanic
INSPECTION
Inspect upper tank strainer and lower tank strainer for damage affecting serviceability.
END OF TASK
REMOVAL
WARNING
The use of Personal Protective Equipment (PPE) is required when using or handling hazardous
materials associated with operating and maintaining equipment (jet fuel, hydraulic luid, brake
luid, ethylene glycol, cleaning solvents, compressed air, and engine/axle oil). Failure to use
PPE when handling these materials could result in injury or death.
1.
Open engine cover (WP 0028).
2.
Remove upper and lower tank strainers (WP 0131).
3.
Clean and or replace as necessary.
END OF TASK
INSTALLATION
1. Install clean or new upper and lower tank strainers (WP 0131).
2. Close engine cover (WP 0028).
3. Perform Maintenance Operation Check.
END OF TASK
END OF WORK PACKAGE
01331/blank