0110
TM 1-1740-221-13&P&P
BATTERY - (CONTINUED)
INSTALLATION
CAUTION
Always connect positive battery cables irst to avoid equipment damage.
1.
Install batteries (Figure 1, Item 6) as illustrated in (Figure 1).
2.
Position hold down straps (Figure 1, Item 2) over J-Bolts.
3.
Install 4 nuts (Figure 1, Item 3) and tighten.
4.
Apply a thin coat of Petrolatum, Technical, a corrosion preventive compound, to all battery posts.
5.
Position positive battery cables (Figure 1, Item 1 and 7).
6.
Tighten positive terminal nuts (Figure 1, Item 6 and 10).
7.
Position negative battery cables (Figure 1, Item 4 and 5).
8.
Tighten negative terminal nuts (Figure 1, Item 9 and 10).
9.
Perform Maintenance Operation Check.
10.
Apply a thin coat of Petrolatum, Technical, a corrosion preventive compound, to all battery terminal connectors.
NOTE
Battery terminal covers are not shown in illustration for clarity.
11. Install battery terminal covers.
12. Install rear deck panel (WP 0028).
END OF TASK
END OF WORK PACKAGE
01103/blank
