0070
TM 1-1740-221-13&P&P
AIR INTAKE TUBING - (CONTINUED)
REMOVAL
NOTE
Automotive style hose clamps or Mormon style hose clamps may be used to secure intake
tubing.
1.
Open engine cover (WP 0028).
2.
Loosen air intake clamp (Figure 1, Item 5).
3.
Loosen air cleaner assembly hose clamp (Figure 1, Item 10).
4.
Remove air intake tubing (Figure 1, Item 1 and 4) as an assembly from the vehicle.
NOTE
To prevent FOD cover turbo air inlet on engine.
5.
Loosen turbocharger clamp (Figure 1, Item 7).
6.
Remove turbocharger intake tubing (Figure 1, Item 6 and 8) as an assembly from the turbocharger.
7.
Disassemble air intake components as necessary for removal and installation.
END OF TASK
INSTALLATION
NOTE
Automotive style hose clamps or Mormon style hose clamps may be used to secure intake
tubing.
1.
Install turbocharger intake tubing (Figure 1, Item 6 and 8) as an assembly on the turbocharger.
2.
Slide air intake tubing (Figure 1, Item 4) into turbo charger intake tubing (Figure 1, Item 6) elbow.
3.
Slide air intake tubing (Figure 1, Item 1) on air cleaner assembly (Figure 1, Item 9).
4.
Tighten turbocharger clamp (Figure 1, Item 7).
5.
Tighten air intake clamp (Figure 1, Item 5).
6.
Tighten air cleaner assembly hose clamp (Figure 1, Item 10).
7.
Perform Maintenance Operation Check.
8.
Close engine cover (WP 0028).
END OF TASK
END OF WORK PACKAGE
00702
