TM 1-1730-232-13&P
3-15.2 Cradle Assembly Inspection, Model 204-050-200-5 (AVUM).
The Cradle Assembly is group number 02 in the MAC. This procedure is applicable to Ground Handling Wheels
Assembly, Model 204-050-200-5 The numbers in parenthesis refer to figure 3-3. Inspect the cradle assembly as follows:
Figure 3-3. Cradle Assembly for Model 204-050-200-5
1. Check for broken, bent, cracked, or damaged cradle assembly (1). If cradle assembly is damaged, return the Ground
Handling Wheels Assembly to AVIM for repair.
2. Check for broken, bent, cracked, or damaged axles assemblies (2 & 3). If an axle assembly is damaged, return the
Ground Handling Wheels Assembly to AVIM for repair.
3. Check for loose, bent, worn, or broken fixed support (nose) pin (22). If nose pin is damaged, return the Ground
Handling Wheels Assembly to AVIM for repair.
4. Check for loose, bent, worn, or broken rear support pin (5). If rear support pin is damaged, return the Ground
Handling Wheels Assembly to AVIM for repair.
END OF TASK
3-16