TM 1-1730-232-13&P
Table 3-2. TROUBLESHOOTING PROCEDURES (cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7.
WHEEL DOES NOT TURN EASILY.
Step 1. Check for tire rubbing hydraulic hose.
Reposition hydraulic hose.
Step 2. Check for binding wheel bearing.
Replace wheel bearing. Refer to para. 3-15.7 (Model 204), 3-16.7 (Model 214), or 3-
17.7 (Model 1730)
Step 3. Check for bent wheel assembly.
Replace wheel assembly. Refer to para. 3-15.6 (Model 204), 3-16.6 (Model 214), or 3-
17.6 (Model 1730).
8.
HYDRAULIC RAM LEAKING.
Step 1. Check for loose fitting.
Tighten fitting.
Step 2. Check for leakage around ram piston.
Replace hydraulic ram. Refer to para. 3-15.5 (Model 204), 3-16.5 (Model 214), or 3-
17.5 (Model 1730).
9.
CRADLE AXLE BINDING.
Step 1. Check for left bent axle.
Replace left axle half. Refer to Chapter 4, AVIM.
Step 2. Check for right bent axle.
Replace right axle half. Refer to Chapter 4, AVIM.
Step 3. Check for broken clevis or clevis pin.
Replace broken clevis or clevis pin. Refer to para. 3-15.5 (Model 204), 3-16.5 (Model
214), or 3-17.5 (Model 1730).
3-13
