TM 1-1730-232-13&P
3-15.4 Hydraulic Pump Replacement, Model 204-050-200-5 (AVUM)-Continued
6.
Remove hydraulic pump (4), with part number 61780, using following steps.
a.
Remove two nuts (16) and washers (17) from U-bolt (18).
b.
Remove U-bolt (18).
c.
Remove two nuts (26), washers (17), and bolts (25).
d.
Grasp pump (4) and lift from cradle assembly (10).
e.
If pump was removed as part of a disassembly procedure, retain pump and attaching hardware for
reinstallation.
f.
If pump was removed because it Is defective, send to AVIM for repair. See Chapter 4, Section V,
paragraph 4-15.1.
Figure 3-6. Hydraulic Pump, Part No. 61780
GO TO NEXT PAGE
3-20
