TM 1-1670-260-12&P
0011 00
__________________________________________________________________________________________
Table 3. Disabled AH-64D and Recovery Helicopter Rigging Key to Figure 1
Figure 1
Item No.
Item Description
1
Green/White 150 Inches (12.5 Ft) Light Weight Slings
2
Green/White 150 Inches (12.5 Ft) Light Weight Slings
3
Green/White 150 Inches (12.5 Ft) Light Weight Slings
4
Green/White 150 Inches (12.5 Ft) Light Weight Slings
5
Crossbar Assembly
6
Yellow/White 153 Inches (12.75 Ft) Light Weight Sling
7
Yellow/White 153 Inches (12.75 Ft) Light Weight Sling
8
Yellow/White 153 Inches (12.75 Ft) Light Weight Sling
9
Yellow/White 153 Inches (12.75 Ft) Light Weight Sling
10
Shackle Assembly
11
Black/White 30 Ft Heavy Weight Sling
12
Blue/White 360 Inches (30.0 Ft) Light Weight Sling
13
Box Link Assembly
14
Red/White 208 Inches (17.33 Ft) Light Weight Sling
15
Box Link Assembly
16
Red/White 208 Inches (17.33 Ft) Light Weight Sling
17
Box Link Assembly
18
Blue/White 360 Inches (30.0 Ft) Light Weight Sling
19
Black/White 30 Ft Heavy Weight Sling with Bridle
20
Sling Link Assembly
21
Black/White 30 Ft Heavy Weight Sling
22
Sling Link Assembly
b. If operable (helicopter with power), to minimize loads on the main and tail rotor blades, set controls to
collective full down, neutral cyclic and pedals.
CAUTION
Ensure slings are placed above droop stop hardware.
c. Install green/white slings (1), (2), (3) and (4) as follows:
(1) Position the mid-point of the green/white sling (1) View A, under the 2 o'clock position main rotor blade
retention assembly by threading the green/white sling (1) through the opening above the Droop Stop
(a) Ensure sling does not cross itself at any point.
(b) Bring sling eyes together.
(2) Position the mid-point of the green/white sling (2) View A, under the 4 o'clock position main rotor blade
retention assembly by threading the green/white sling (2) through the opening above the Droop Stop
(a) Ensure sling does not cross itself at any point.
(b) Bring sling eyes together.
0011 00-5
Ring and Droop Stop Follower Spring ensuring that the sling passes inboard of the inboard strap pack hub bolts.
Ring and Droop Stop Follower Spring ensuring that the sling passes inboard of the inboard strap pack hub bolts.
